Principle:
The automatic punching machine punches the product end with a high-speed rotating cutter.
The machine working speed, stroke, rotating speed can be adjusted, it is able to punch on any product. The equipment is easy to operate and the requirement of operators quality is low. The equipment is highly integrated, with compact structure, save space and is easy to place and move.
Parts | Brands | Place of origin | |||
Drawing module | Shangyin KK Module | Taiwan China | |||
HMI | Weiluntong touch screen | Taiwan China | |||
Drawing motor | Shangyin AC servo motor | Taiwan China | |||
Drive and actuator | SMC | Japan | |||
Motion control core | Mitsubishi PLC FX3U | Japan | |||
Temperature control core | Omron PID thermostat | Japan | |||
Electrical parameters | |||||
Input voltage | AC210~230V;50Hz | Medium | Clean compressed air | ||
Maximum power | 700W | Output pressure range | according to customer needs | ||
Ambient humidity | 0~75% | Stroke | according to customer needs | ||
Ambient temperature | 5~55℃ | Maximum shaft rotating speed | 3000rpm | ||
Size | 800*460*610 | Maximum fixture speed | 60mm/s | ||
Installation site | Standard production workshop | Fixture speed accuracy | ±0.02mm/s |
Device Description:
a.Display: real-time display of drilling status during the product processing;
b.HMI: the interface for information exchange between equipment and operators;
c.Emergency switch: the button to stop operation of equipment immediately;
d.Key switch: switch to power on/off the equipment;
e.Camera:real-time observe the drilling situation;
f.High-speed rotating shaft: work station for punching the product;
g.Fixture: to fix the work position of the product;
h.Control buttons: for controlling the machine, such as stop and start.
Welcome
Please point meClick to inquiry
Contact us:
+86-021-58646500