The equipment is mainly used for liquid pressure testing of medical balloons, surgical accessories and other products. It is equipped with test modes such as stepped pressurization, pressure fatigue, and constant pressure maintenance. The maximum output pressure of this series of products can reach 500 psi. This product is equipped with a three-point balloon outer diameter measuring tool.
Item | Parameter |
Model | PTW-1000 |
Input voltage | AC210~230V;50Hz |
Maximum power | 300W |
Input air source | Clean compressed air |
Compressed air | 0.5Mpa≤P≤0.7Mpa |
Ambient humidity | 0~75% |
Ambient temperature | 5~55 ℃ |
Equipment size (host) | 450x 550 x 230(mm) |
Installation site | Standard production workshop |
Mediaum | Purified Water |
Output pressure range | 0~30atm(0~500psi) |
Maximum water throughput | >35 ml |
Working mode 1 | Stepped increase pressure test |
Working mode 2 | Cyclic fatigue test |
Balloon diameter test accuracy | Resolution:0.001mm |
Test balloon length | 0~280mm |
Data output format | Electronic report |
Software | PC-side windows test software |
Device Description:
a. HMI: used for manual setting of equipment operation, parameters, working mode, etc .;
b. Power switch: equipment power on/off switch;
c. Pressure regulating valve: adjust the tightening force on the product;
d. Pressure gauge: display the adjusted pressure;
e. Water pressure output port: the port to connect the product to test pressure, which can be customized according to the connector of test product;
f. Control buttons: buttons to control the program system.
Welcome
Please point meClick to inquiry
Contact us:
+86-021-58646500